l  Burner control unit, ignition transformer, indicators, manual operation in a space-saving metal housing which completely replace the local cabinet.

l  High protection level enables the controller to be installed nearby the burner.

l  Flame control with ionization sensor or UV sensor.

l  Ignition and monitoring with a single electrode.

l  Cut-off threshold for flame current variable

l  Measuring sockets for uninterrupted flame current measurement

l  Restart or immediate fault lock-out following flame failure,

l  Switchable signal contacts for operation and faults

Signal and control line: max. 2.5 mm².

Cable for burner ground/PE wire: 4 mm².

Cable gland: 5 cable glands with multiple seal inserts for cable diameters of up to 7 mm.

Mains voltage: 230 V AC, -15/+10%, 50/60 Hz

Power consumption: approx. 9 VA plus inherent consumption of the integrated ignition transformer.

Output current: max. 1A, cos ϕ = 1, for the valve, but total current for valves and ignition transformer max. 2.5 A.

Signal contact for operation and faults: max. 2 A, 253 V, no internal fuse.

Length of sensor cable: with ionization control: max. 75 m, with UV control: max. 100 m.

Sensor current: > 2 μA, cut-off threshold for flame current variable between 2 and 20 μA.

Ambient temperature: -20°C to +60°C

Enclosure: IP 54

Weight: approx. 5 kg.